Step:1 Customer collects the Q.Number for vehicle Inspection  

Step:2 Customer parks the vehicle in the parking area

Building#1

Step:3 Customer entering in the building #1 with necessary documents for registration.

Customer Service - Registration Process

Step:4 Customers waiting in the customer service area until Q.Number appears on display 

Step:5 Registering the vehicle for inspection in the Registration counter  

Step:6 Customer brings the vehicle from the parking area for inspection with registration slip & documents in the Queue

Waiting for entering the vehicle

Step:7Customer waiting in front of the inspection lane for inspection

 Customer entering in the inspection hall:

Step:8 Customer entering the vehicle in the inspection hall (Section -1)

Customer Waiting area:

Step:9 Customer came back and waiting in the customer service area for the inspection process completion.

Step:10 Checking the exhaust emission

Specific limits:

Carbon monoxide (CO)-- 4.5% {For Gasoline Engine}
Hydrocarbons (HC)--1200ppm {For Gasoline Engine}
Smoke density –2.50 Kmax (For Diesel Engine)

Note:

Vehicle must be presented for the test with the engine at normal working temperature

Engine room Test

Step:11 Checking the engine room

• License plates and vehicle identification number (VIN)
• Brake master cylinder including booster
• Lines and hoses, steering (incl. boots if visible)
• Suspension, inlet and exhaust manifolds
• Coolant, fuel lines and hoses
• Engine (pulleys, belts, mountings)
• Electrical system (battery, wires, distributor, ignition coil),
• Body / frame, radiator etc. with respect to corrosion, fractures, cracks, mounting, leakage and improper repair.  

Step:12Checking the Headlight

• Head Lamps are checked for focus on the dipped beam as per the standard

• Condition and function of all external lamps visually

Interior Test

Step:13 Checking the Interior

• Door opener and hinges (all doors)

• Seats

• Seat belts (front)

• Cluster lights

• Wiper

• Sun visors

• Inside / outside mirrors (fading, mounting...)

• Condition of clutch and brake pedal

• Slight resistance while engaging the reverse gear

• Wind shield

• Instrument panel

• Roof lining

• Power windows

Step:14 Checking the exterior

• Body

• Glasses

• Wheels (tires and rims)

• Lights (as applicable)

• Bumpers

• Trunk and fuel lids

Brake Test:

Step:15 Checking the Brake

• Weight Measurement

• Side slip

• Brake test will be carried at this stage

• Service Brake

• Parking Brake

Light Test

Step:16 Checking the lights

Function and brightness of external lamps

• Signal light

• Brake light

• Parking light

• Reverse light

• Hazard light

Under Chassis check up

Step:17 Checking the under chassis

• Electrical wiring

• Body condition

• Steering system

• Tires

• Road wheels and hubs

• Suspension, wheel bearings and drive shafts

• Shock absorbers

• Oil leaks

• Engine and transmission mountings

• Transmission

• Exhaust system

• Mechanical brake components

• Brake hydraulic, air and vacuum systems

• Fuel system

• Spare wheel and carrier

• General condition of vehicle

Customer Service - Report Process

Step:18  Q.No displayed in the counter  for the customer  to collect the report.

Step:19 Customer collecting the inspection report from the counter